Fire Watch and Alarm Response Security Guards

Qimah guards watch hot work areas and zones where fire systems are out of service, respond on site to alarms from your panels, raise the alarm, call Civil Defense and guide evacuation.

Security Guards for Fire Watch and Alarm Response at Your Facility

When welding or cutting is under way at your site, when the alarm or sprinkler system is shut down for maintenance, or when your warehouses sit unwatched all night, you need a trained human eye that notices the first sign of smoke. Qimah Security Guards, a licensed private security company holding an HCIS Category One guarding licence, provides security guards for fire watch patrols and for on site response to fire and intrusion alarms from your own panels.

The role of the guard is clear: early detection, raising the alarm, calling Civil Defense, guiding evacuation, keeping access routes open and recording every round. Our guards are not firefighters and they do not service or certify fire systems.

When Your Facility Needs Fire Watch Patrols

  • During hot work such as welding, cutting and grinding inside occupied buildings or plants.
  • When the fire alarm or sprinkler system is faulty, or shut down for maintenance or modification.
  • During construction stages before permanent fire protection systems are commissioned.
  • On night rounds inside warehouses and distribution centres, especially in the hot summer months.
  • During shutdown and turnaround periods at industrial plants in Jubail, Yanbu and Ras Tanura.

Why Qimah for Fire Watch

A Guard Dedicated to Watching

The fire watch guard takes no part in the work itself, so full attention stays on sparks and smoke.

A Written Response Procedure

Every alarm is handled through steps agreed with you, from checking to reporting and recording.

Logs Ready for Review

Signed round and alarm logs you can show your safety officer or the authorities when asked.

Hot Work Fire Watch

The Saudi Fire Code SBC 801 includes chapters on fire safety during construction and demolition and on welding and other hot work. On site, your safety officer sets the conditions of the work permit, and our guard carries out the fire watch role defined in that permit.

Fire Watch Guard Duties Under the Permit

  • Confirming that a valid work permit is on site before work starts, and alerting the supervisor if it is not.
  • Checking that combustible materials have been removed or covered as the permit requires.
  • Staying beside the assigned extinguisher and watching for sparks throughout the work without taking on other tasks.
  • Continuing the watch after work ends for the period set in the permit, including nearby areas and the floors below.
  • Stopping the work and informing the safety officer if any hazard appears, and signing the watch log at close out.

Fire Watch Rounds When Systems Are Out of Service

When the alarm or sprinkler system is down in part of the facility, the guard becomes the temporary means of detection. We agree a round route with your team that covers the affected area at set intervals. On each round the guard checks for smoke or unusual smells, confirms that emergency exits are not locked or blocked, that fire doors are closed and that extinguishers are in place. Every round is logged with the time, and any observation goes to your maintenance contractor without the guard touching the systems.

Responding to Fire and Intrusion Alarms From Your Panels

An alarm that nobody checks is either ignored or causes an unnecessary evacuation. Our guard follows a written response procedure agreed with you:

  • Reading the panel and identifying the zone that triggered the alarm.
  • Sending the nearest guard to check, with the operator following on camera if your control room is staffed.
  • If smoke or fire is confirmed: raising the general alarm, calling Civil Defense and starting evacuation.
  • If the alarm proves false: informing the facility manager, and resetting the panel only if your procedure allows it.
  • For intrusion alarms: checking with caution and without risky confrontation, calling the police and protecting the scene.
  • Recording every alarm and its outcome in the alarm log.

Civil Defense receives reports on 998, while the unified number 911 takes them in the Riyadh, Makkah, Madinah and Eastern Province regions, and our guards are briefed on the correct number for your site region.

Guiding Evacuation and Keeping Access Routes Clear

At the moment of evacuation our guards know the site better than any visitor. They direct staff and visitors to assembly points, stop anyone going back inside, keep fire engine lanes and hydrants free of vehicles, meet Civil Defense crews at the gate and lead them to the incident and the alarm panel, and help your team account for everyone. These duties work alongside your gate guards and support, rather than replace, the emergency plan of your facility.

Clear Role Limits and How We Prepare Our Guards

Servicing, testing and certifying fire systems stays with your approved technical contractor, and meeting Civil Defense requirements stays with the facility. The guard role centres on detection, reporting and guidance. We therefore train our own guards before and during deployment in recognising fire hazards, using portable extinguishers on small fires at the very start without putting themselves at risk, reading alarm panels and keeping logs, and we then run a site induction and evacuation drills with your safety team.

How the Service Starts

  1. Site Security Survey: We map hot work areas, impaired systems, alarm panels, assembly points and Civil Defense access points.
  2. Round and Response Plan: We agree round routes and intervals, the alarm response procedure and the contact list.
  3. Guard Induction and Evacuation Drill: Guards learn the site, panels and extinguishers, and we run a drill with your safety team.
  4. Deployment and Field Supervision: Guards start on the required shifts with supervision visits and regular log reviews with you.

Fire Watch and Alarm Response Questions

It is assigning a trained guard to watch a defined area, spot any fire as it starts and raise the alarm at once. It is used during hot work or when fire protection systems are out of service.

It is not advisable, because the welder focuses on the work and cannot see sparks landing behind. Work permits therefore usually call for a separate fire watch.

No. Our guards are civilian security guards trained to detect, raise the alarm, call Civil Defense and guide evacuation. They may use a portable extinguisher on a small fire at its very start only when it is safe.

Only if your facility procedure allows it after a ground check. Otherwise the guard informs the facility manager or maintenance contractor and logs the event.

No. We provide a guarding service only. Servicing and testing belong to your approved technical contractor, and safety requirements fall under Civil Defense.

The number is 998, and the unified number 911 is used in the Riyadh, Makkah, Madinah and Eastern Province regions.

Protect Your Site During Hot Work and System Shutdowns Plan Your Security Visit

Request A Quote

Tell us your facility type and location. A security consultant will respond within 24 hours with a tailored plan and pricing. You can also email us on: info@qimahsecurityguards.com

    For Businesses & Facilities Only - No Job Applications